Repairing sewer pipe failures should only be done by a professional company in the field that has the necessary equipment. It is extremely important to take into account that the sewer system is underground and there are cases where an unprofessional eye will not be able to locate the source of the problem and sometimes problems in the sewer system will require replacing the pipe. One way to detect failures is by taking sewer photos by a professional company in the field.
What are sewer pipe failures?
Sewer system failures may be the accumulation of roots in the sewer and for this purpose, roots in the sewer must be cut using professional equipment in the field. As time passes, wear and tear occurs in the sewer system due to improper use that may create a load on the sewer system. The sewer system is built in such a way that it allows for the disposal of waste and wastewater and there are various bodies in the sewer system that may cause blockages in the system or accumulate more dirt. If there is a leak in the sewer, then the repair of the leak in the sewer will be carried out by a professional company in the field that will use advanced equipment such as a thermal camera. Advanced gas systems. Acoustic systems. Leak detection using a thermal camera will be the most suitable solution.
What is pipe ? Sewer camera inspection
Pipe camera inspection is considered one of the newest techniques for locating failures in the sewage system. Repairing failures in sewage pipes will be carried out using photography and will ensure the best result. Pipe repair using photography will include taking an interior photograph of the pipe using an advanced optical fiber with 360-degree scanning capability and identifying failures. This is new and highly advanced equipment that allows for an extremely high-quality image to be obtained and thus locate small failures in the sewage system. An optical fiber is inserted into the sewage system and can be viewed on a screen and cracks to be located.
After locating the failures, the camera head transmits a signal that is received by a special detector and thus the exact location of the failure can be seen – which is an extremely important component in carrying out the repair. There is no doubt that using this technique, you can save valuable time and great physical effort in trying to locate leaks.
What is important when detecting moisture?
As time passes, the pipes wear out and undergo a process called corrosion, resulting in many cracks and explosions that may cause leaks. There is no doubt that these are extremely unpleasant phenomena that can cause high financial expenses and discomfort, and therefore detecting moisture is required by a professional company. By testing for water leaks, the following phenomena can be prevented:
Dampness.
Mold.
Rot.
Dark mold stains.
Swelling and peeling on the walls and ceiling.
These are phenomena that may lead to the formation of various allergic reactions such as asthma, cough, and more.
On the importance of detecting leaks
Discovering leaks in the home is no small matter, and therefore, for the purpose of detecting water leaks, it is extremely important to order the services of a professional company in the field. With relevant authority and many years of experience. Sometimes it may take time before you notice a problem and the only thing that may raise suspicion is a high water bill – this is a sign that you need to turn on a red light, so it is extremely important to address the problem as soon as possible in order to prevent the situation from getting worse.
Using a water leak detector that includes unique equipment, you can use advanced technology and offer smart solutions that include, among other things, thermal imaging that allows you to identify the problem as soon as possible and lead to the best solution. A professional company in the field will use professional and high-quality plumbing equipment that will meet international standards in order to allow continuous work and maintain safety rules.
What are the methods for renewing pipes?
Leak detection will be performed by a leak detection expert who will use a variety of methods to check for failures in the pipes, including photographing sewer pipes. If you suffer from a problem with a leak from the sewer pipe, there are various methods today that can be used to renew the pipes without destruction. If in the past it was necessary to break walls or floors in order to repair the leak, today this is not the case and different methods can be found. Here are a few methods:
The patching method: This is an advanced method that does not require breaking protrusions or removing the sewer pipe. This is a method based on inserting a balloon wrapped in glass fibers. The balloon is attached to the point where there is a failure and then the balloon is inflated to the point where all the materials adhere to the walls of the pipe and form a patch. The materials become hard and thus plug the cracks that created the leak in the sewer. 50 times stronger than the existing pipe.
The sleeve method: This is a method based on the principle that a sleeve is inserted into the pipe. It can also be used by taking a picture of the pipe, and then you can find out what dimensions are needed for the pipe where the failure was discovered. The sleeve is inserted into the pipe and the pipe is attached to the walls, and thus a new pipe can be obtained that sits inside the existing pipe, thus solving the problem without any destruction. The method is suitable for long pipes, usually municipal pipes.
Epoxy brushing method: Epoxy brushing. Suitable for pipe connections and many angles where it is not possible to repair with the help of patching. Epoxy coating renews the interior of the pipe to a smooth texture and without pipe connections. With this method, any type of pipe can be renewed without the need to replace the existing pipe. It is important to use quality materials that last for years. And with the help of a professional who has undergone professional training to perform epoxy brushing. If the material is applied incorrectly to the pipe, the coating will not last for years.
Concrete and iron crushing: This is a method based on the most advanced technology and through which a robotic arm can be inserted into the pipe. The arm causes the waste to break down, which can then be washed away with a strong stream of water.
We note that each of the methods has a different price, and therefore the price of detecting leaks is not uniform but is determined according to the method. Hence, it is of utmost importance to know the different methods in order to choose the most appropriate method.
How to choose the most appropriate company?
Repairing failures in the sewage system requires a smart choice of professionals who are able to use advanced equipment to solve the problem as quickly as possible. Here are a number of parameters to consider before making a choice: