בלוג

Pipe damage due to water leaks

Pipe damage due to water leaks

Pipe damage due to water leakage!!!

Pipe damage due to water leaks. The causes and damage that water leaks cause over time
Equipment damage due to leaks or dampness. Although this is a secondary hazard that is less harmful than direct damage, such as walls and ceilings. The direct damage of water damage is very dangerous. Damage to the foundations of the apartment, damage to the iron construction of the apartment. The iron in contact with water becomes weak due to swelling and corrosion during water penetration. If you have a lowered ceiling in your home and there is a leak above, there is a risk that the plaster will collapse. Another problem is mold. Mold is very common in damp places without ventilation due to leaks that are not treated in time. It becomes mold that is very difficult to get out of. Sometimes it is not possible to notice mold if it is found behind cabinets and other hiding places. Mold is a fungus that is dangerous to breathe, especially for asthma sufferers. As soon as we see dark spots and swelling of the plaster. For this we will need a leak detector to locate where water is coming from in the damp places.
In damage to furniture and other equipment, once mold has taken hold of the wood, it is impossible to clean it, this is permanent damage to the wood.
Health damage. There are many causes of diseases related to the presence of mold or other pathogens within a structure that cause and provoke sensitivities, especially to dust, and mold itself in a structure "infected" with mold poses significant problems and it is very difficult to heal these places. {The pollutants originating from mold cause allergies and respiratory problems}
Additional water damage.
Most of the building's pipes run simultaneously under the floor and in the walls, sometimes even in the ceiling. These infrastructures are electricity, gas, communications, water, and sewage. Infrastructures that absorb water, especially electricity and communications infrastructures, begin to suffer damage and disruptions in a short time. It is important to know that this is a life-threatening hazard. Usually, most types of pipes are threaded into non-sealed plastic pipes, which are actually a conductor for water stored in this pipe and are used to carry the water to electrical cabinets, plugs, lamps, and communication cabinets. Also, the electrical wires are insulated, but over time, the water melts and weakens the insulation. And these cause short power outages in systems and additional damage. To the point of disrupting the entire system.
In cases that are not treated in time, it can also lead to a fire. Damage to damaged water pipes that were not treated in time also damages the gas pipes. The water causes corrosion. And needless to mention the consequences of gas leaks from rusty pipes.
Another damage that can be caused by water leaks.
Is that water in the structure can cause significant ground movement and retreat of the structure. If you live on the coastal plain or on a terraced area, the situation may cause severe movements in the structure, usually starting to show cracks around the structure as well as in the ceiling or walls and movement in the floors.
The water seeps into the foundations of the structure and outside it. This water affects the strength of the foundations and the entire structure. Over time, the iron in the construction that was cast in the concrete begins to rust over time, which may cause the iron to lose its strength and crumble. In addition, the concrete soaked in water also tends to crumble due to the weakening of the bond with the iron, in addition to this, mold begins to form, which tends to crumble everything around it.
It is important to treat the leak in time so that it does not cause much damage to your home and the equipment inside it!!!!

נזקי צנרת בעקבות נזילת מים

איתור נזילות

Pipe-damage-due-to-water-leak

Leak detection

Is the precise form of locating water leaks in the home. Using advanced equipment and technology, water leak detection can provide an accuracy of 100% to 90%. This high accuracy rate means that minimal damage will be caused to your home and that you will be able to fix the failure quickly. How do you find the best leak detector for us? It is advisable to check and conduct a survey regarding the field of leak detection before ordering a professional. To check the training of the professional you are ordering, currently in the State of Israel there is no organized body that gives official certification to leak detectors and non-destructive pipe repairs. A professional is measured by his years of experience and professional training he has undergone, preferably professional training from Europe, such as Germany, the Netherlands, England, Switzerland. In these countries, it is not possible to obtain the certification without past experience and success in practical learning. In these countries, a plumber or leak detector, in order to obtain certification, must work for two years as an intern with a veteran professional in order to obtain certification and work authorization.

For example, a professional with a European certification and 15 years of relevant activity experience in our company, Roytec Technologies, will find a variety of certification certificates.

Ways to detect leaks.

Thermal imaging, gas detectors, moisture meters, acoustic detectors, infrastructure detectors, pressure gauges, UV, 360 fiber cameras, a professional who comes to a leak site must have the variety of technologies to detect the leak. Without the required equipment, it is not possible to completely locate the leak. It is important to check with what equipment the "leak detector" comes to our home. We can already understand from the phone call or from the amount that the detector requires how professional. And what does the detector use. Quality equipment costs money and quite a bit. Advanced technology solves the mental anguish and unnecessary destruction for the customer. Fiber optic camera: A fiber optic camera. A camera that is inserted into the sewer pipe to identify failures. With the help of the camera, the cause of the leak and its exact location can be seen. There are types of cameras, some of which are 360-degree robotic cameras that can scan the sewer system and produce a report of findings after the photo is taken. There are cameras with high image quality, which is important because this leads to accurate identification of the failure and not guessing. A poor-quality camera does not provide a certain identification of the failure. And causes us to pay unnecessary money. A professional photographer is equally important, who knows how to identify the failure professionally and not guess. In a situation where the photographer is not sure about the photo, he can repair an undamaged area and not solve the problem for which he came. With the help of a professional pipe photographer, additional tests can be performed before making a repair for certain identification if there is a suspicion of a failure in the pipe, for which the photo was taken. Pipe Interior Photography Our technology for pipe interior photography checks sewer infrastructure, drainage, sewer conditions vary from one pipe to another. You never know what you are going to find in the pipe. And you need diagnostic tools and methods that can withstand any failure you find. With pipe interior photography, we give you the clearest and most comprehensive picture of The entire plumbing system. We provide with the help of internal pipe photography you get all the intelligence you need to make smart decisions, regarding the planning and further treatment of your sewage/drainage. With the help of internal pipe photography we know how to identify quickly and at a reasonable price which lines are not working properly. So that you can focus your time and resources where they are needed. Internal pipe inspections are clean and accurate and can quickly and at a low price determine the nature of the problem in the piping. At the end of the photography, a detailed report is issued for failures in the piping and recommendations for treatment. UV testing: This is not a test that is performed on sewage/drainage/sludge piping. This test combined with optical photography gives us a complete picture of the piping being tested and certainty about the leak and the remaining failure is visible in the piping on which the photography was performed. Thermal Camera Thermal Imaging While a fiber optic camera works inside pipes, it is not useful for locating live water leaks. In these circumstances, a thermal camera can work really well for water pipes. Hot water pipes in particular have a different temperature than the surrounding area if there is a leak. In hot water pipes, they seep into the surrounding area and temporarily heat it up. The change in temperature can be seen on the thermal camera, which will locate the leak. Acoustic Detector An acoustic system with a microphone held close to the suspected leak will amplify the sound of dripping water, allowing the plumber to figure out where the leak is. A microphone can be used as an alternative to a thermal camera, but is only effective when the water noise changes significantly. Smaller leaks, or leaks where there is seepage rather than a high burst of water, are difficult to detect with a microphone. Gas detector Gas detectors introduce gas into the water supply system. With this detector, you can detect small leaks that cannot be detected with a thermal camera or an acoustic detector. The gas system that is inserted into the water pipe is made of hydrogen and nitrogen, which can quickly seep into the ground and break through, and with the help of the sensor attached to the ground, you can quickly identify the leak area. With a moisture meter, you can know the moisture level in the wall/floor to identify a wet or damp area. A tool for identifying leaks and checking the moisture level under the flooring. Pressure gauge, with the pressure gauge, you can check the pipes divided by taps, to identify interior leaks in apartments, and to isolate the pipes to identify leaks. Infrastructure locator The role of the infrastructure locator is to identify the characteristics of the pipes for the purpose of monitoring and checking the pipes with the help of the detectors. If the infrastructure is not located, it would be very difficult to work and identify the leak. The infrastructure locator is also used to identify electrical and electronic systems underground.

Pipeline-damage-due-to-water-leakage. To be treated quickly!!!!

Pipe damage due to water leakage!!!

Pipe damage due to water leaks. The causes and damage that water leaks cause over time
Equipment damage due to leaks or dampness. Although this is a secondary hazard that is less harmful than direct damage, such as walls and ceilings. The direct damage of water damage is very dangerous. Damage to the foundations of the apartment, damage to the iron construction of the apartment. The iron in contact with water becomes weak due to swelling and corrosion during water penetration. If you have a lowered ceiling in your home and there is a leak above, there is a risk that the plaster will collapse. Another problem is mold. Mold is very common in damp places without ventilation due to leaks that are not treated in time. It becomes mold that is very difficult to get out of. Sometimes it is not possible to notice mold if it is found behind cabinets and other hiding places. Mold is a fungus that is dangerous to breathe, especially for asthma sufferers. As soon as we see dark spots and swelling of the plaster. For this we will need a leak detector to locate where water is coming from in the damp places.
In damage to furniture and other equipment, once mold has taken hold of the wood, it is impossible to clean it, this is permanent damage to the wood.
Health damage. There are many causes of diseases related to the presence of mold or other pathogens within a structure that cause and provoke sensitivities, especially to dust, and mold itself in a structure "infected" with mold poses significant problems and it is very difficult to heal these places. {The pollutants originating from mold cause allergies and respiratory problems}
Additional water damage.
Most of the building's pipes run simultaneously under the floor and in the walls, sometimes even in the ceiling. These infrastructures are electricity, gas, communications, water, and sewage. Infrastructures that absorb water, especially electricity and communications infrastructures, begin to suffer damage and disruptions in a short time. It is important to know that this is a life-threatening hazard. Usually, most types of pipes are threaded into non-sealed plastic pipes, which are actually a conductor for water stored in this pipe and are used to carry the water to electrical cabinets, plugs, lamps, and communication cabinets. Also, the electrical wires are insulated, but over time, the water melts and weakens the insulation. And these cause short power outages in systems and additional damage. To the point of disrupting the entire system.
In cases that are not treated in time, it can also lead to a fire. Damage to damaged water pipes that were not treated in time also damages the gas pipes. The water causes corrosion. And needless to mention the consequences of gas leaks from rusty pipes.
Another damage that can be caused by water leaks.
Is that water in the structure can cause significant ground movement and retreat of the structure. If you live on the coastal plain or on a terraced area, the situation may cause severe movements in the structure, usually starting to show cracks around the structure as well as in the ceiling or walls and movement in the floors.
The water seeps into the foundations of the structure and outside it. This water affects the strength of the foundations and the entire structure. Over time, the iron in the construction that was cast in the concrete begins to rust over time, which may cause the iron to lose its strength and crumble. In addition, the concrete soaked in water also tends to crumble due to the weakening of the bond with the iron, in addition to this, mold begins to form, which tends to crumble everything around it.
It is important to treat the leak in time so that it does not cause much damage to your home and the equipment inside it!!!!

נזקי צנרת בעקבות נזילת מים

איתור נזילות

Pipe-damage-due-to-water-leak

Leak detection

Is the precise form of locating water leaks in the home. Using advanced equipment and technology, water leak detection can provide an accuracy of 100% to 90%. This high accuracy rate means that minimal damage will be caused to your home and that you will be able to fix the failure quickly. How do you find the best leak detector for us? It is advisable to check and conduct a survey regarding the field of leak detection before ordering a professional. To check the training of the professional you are ordering, currently in the State of Israel there is no organized body that gives official certification to leak detectors and non-destructive pipe repairs. A professional is measured by his years of experience and professional training he has undergone, preferably professional training from Europe, such as Germany, the Netherlands, England, Switzerland. In these countries, it is not possible to obtain the certification without past experience and success in practical learning. In these countries, a plumber or leak detector, in order to obtain certification, must work for two years as an intern with a veteran professional in order to obtain certification and work authorization.

For example, a professional with a European certification and 15 years of relevant activity experience in our company, Roytec Technologies, will find a variety of certification certificates.

Ways to detect leaks.

Thermal imaging, gas detectors, moisture meters, acoustic detectors, infrastructure detectors, pressure gauges, UV, 360 fiber cameras, a professional who comes to a leak site must have the variety of technologies to detect the leak. Without the required equipment, it is not possible to completely locate the leak. It is important to check with what equipment the "leak detector" comes to our home. We can already understand from the phone call or from the amount that the detector requires how professional. And what does the detector use. Quality equipment costs money and quite a bit. Advanced technology solves the mental anguish and unnecessary destruction for the customer. Fiber optic camera: A fiber optic camera. A camera that is inserted into the sewer pipe to identify failures. With the help of the camera, the cause of the leak and its exact location can be seen. There are types of cameras, some of which are 360-degree robotic cameras that can scan the sewer system and produce a report of findings after the photo is taken. There are cameras with high image quality, which is important because this leads to accurate identification of the failure and not guessing. A poor-quality camera does not provide a certain identification of the failure. And causes us to pay unnecessary money. A professional photographer is equally important, who knows how to identify the failure professionally and not guess. In a situation where the photographer is not sure about the photo, he can repair an undamaged area and not solve the problem for which he came. With the help of a professional pipe photographer, additional tests can be performed before making a repair for certain identification if there is a suspicion of a failure in the pipe, for which the photo was taken. Pipe Interior Photography Our technology for pipe interior photography checks sewer infrastructure, drainage, sewer conditions vary from one pipe to another. You never know what you are going to find in the pipe. And you need diagnostic tools and methods that can withstand any failure you find. With pipe interior photography, we give you the clearest and most comprehensive picture of The entire plumbing system. We provide with the help of internal pipe photography you get all the intelligence you need to make smart decisions, regarding the planning and further treatment of your sewage/drainage. With the help of internal pipe photography we know how to identify quickly and at a reasonable price which lines are not working properly. So that you can focus your time and resources where they are needed. Internal pipe inspections are clean and accurate and can quickly and at a low price determine the nature of the problem in the piping. At the end of the photography, a detailed report is issued for failures in the piping and recommendations for treatment. UV testing: This is not a test that is performed on sewage/drainage/sludge piping. This test combined with optical photography gives us a complete picture of the piping being tested and certainty about the leak and the remaining failure is visible in the piping on which the photography was performed. Thermal Camera Thermal Imaging While a fiber optic camera works inside pipes, it is not useful for locating live water leaks. In these circumstances, a thermal camera can work really well for water pipes. Hot water pipes in particular have a different temperature than the surrounding area if there is a leak. In hot water pipes, they seep into the surrounding area and temporarily heat it up. The change in temperature can be seen on the thermal camera, which will locate the leak. Acoustic Detector An acoustic system with a microphone held close to the suspected leak will amplify the sound of dripping water, allowing the plumber to figure out where the leak is. A microphone can be used as an alternative to a thermal camera, but is only effective when the water noise changes significantly. Smaller leaks, or leaks where there is seepage rather than a high burst of water, are difficult to detect with a microphone. Gas detector Gas detectors introduce gas into the water supply system. With this detector, you can detect small leaks that cannot be detected with a thermal camera or an acoustic detector. The gas system that is inserted into the water pipe is made of hydrogen and nitrogen, which can quickly seep into the ground and break through, and with the help of the sensor attached to the ground, you can quickly identify the leak area. With a moisture meter, you can know the moisture level in the wall/floor to identify a wet or damp area. A tool for identifying leaks and checking the moisture level under the flooring. Pressure gauge, with the pressure gauge, you can check the pipes divided by taps, to identify interior leaks in apartments, and to isolate the pipes to identify leaks. Infrastructure locator The role of the infrastructure locator is to identify the characteristics of the pipes for the purpose of monitoring and checking the pipes with the help of the detectors. If the infrastructure is not located, it would be very difficult to work and identify the leak. The infrastructure locator is also used to identify electrical and electronic systems underground.

Pipeline-damage-due-to-water-leakage. To be treated quickly!!!!

Pipe damage due to water leakage!!!

Pipe damage due to water leaks. The causes and damage that water leaks cause over time
Equipment damage due to leaks or dampness. Although this is a secondary hazard that is less harmful than direct damage, such as walls and ceilings. The direct damage of water damage is very dangerous. Damage to the foundations of the apartment, damage to the iron construction of the apartment. The iron in contact with water becomes weak due to swelling and corrosion during water penetration. If you have a lowered ceiling in your home and there is a leak above, there is a risk that the plaster will collapse. Another problem is mold. Mold is very common in damp places without ventilation due to leaks that are not treated in time. It becomes mold that is very difficult to get out of. Sometimes it is not possible to notice mold if it is found behind cabinets and other hiding places. Mold is a fungus that is dangerous to breathe, especially for asthma sufferers. As soon as we see dark spots and swelling of the plaster. For this we will need a leak detector to locate where water is coming from in the damp places.
In damage to furniture and other equipment, once mold has taken hold of the wood, it is impossible to clean it, this is permanent damage to the wood.
Health damage. There are many causes of diseases related to the presence of mold or other pathogens within a structure that cause and provoke sensitivities, especially to dust, and mold itself in a structure "infected" with mold poses significant problems and it is very difficult to heal these places. {The pollutants originating from mold cause allergies and respiratory problems}
Additional water damage.
Most of the building's pipes run simultaneously under the floor and in the walls, sometimes even in the ceiling. These infrastructures are electricity, gas, communications, water, and sewage. Infrastructures that absorb water, especially electricity and communications infrastructures, begin to suffer damage and disruptions in a short time. It is important to know that this is a life-threatening hazard. Usually, most types of pipes are threaded into non-sealed plastic pipes, which are actually a conductor for water stored in this pipe and are used to carry the water to electrical cabinets, plugs, lamps, and communication cabinets. Also, the electrical wires are insulated, but over time, the water melts and weakens the insulation. And these cause short power outages in systems and additional damage. To the point of disrupting the entire system.
In cases that are not treated in time, it can also lead to a fire. Damage to damaged water pipes that were not treated in time also damages the gas pipes. The water causes corrosion. And needless to mention the consequences of gas leaks from rusty pipes.
Another damage that can be caused by water leaks.
Is that water in the structure can cause significant ground movement and retreat of the structure. If you live on the coastal plain or on a terraced area, the situation may cause severe movements in the structure, usually starting to show cracks around the structure as well as in the ceiling or walls and movement in the floors.
The water seeps into the foundations of the structure and outside it. This water affects the strength of the foundations and the entire structure. Over time, the iron in the construction that was cast in the concrete begins to rust over time, which may cause the iron to lose its strength and crumble. In addition, the concrete soaked in water also tends to crumble due to the weakening of the bond with the iron, in addition to this, mold begins to form, which tends to crumble everything around it.
It is important to treat the leak in time so that it does not cause much damage to your home and the equipment inside it!!!!

נזקי צנרת בעקבות נזילת מים

איתור נזילות

Pipe-damage-due-to-water-leak

Leak detection

Is the precise form of locating water leaks in the home. Using advanced equipment and technology, water leak detection can provide an accuracy of 100% to 90%. This high accuracy rate means that minimal damage will be caused to your home and that you will be able to fix the failure quickly. How do you find the best leak detector for us? It is advisable to check and conduct a survey regarding the field of leak detection before ordering a professional. To check the training of the professional you are ordering, currently in the State of Israel there is no organized body that gives official certification to leak detectors and non-destructive pipe repairs. A professional is measured by his years of experience and professional training he has undergone, preferably professional training from Europe, such as Germany, the Netherlands, England, Switzerland. In these countries, it is not possible to obtain the certification without past experience and success in practical learning. In these countries, a plumber or leak detector, in order to obtain certification, must work for two years as an intern with a veteran professional in order to obtain certification and work authorization.

For example, a professional with a European certification and 15 years of relevant activity experience in our company, Roytec Technologies, will find a variety of certification certificates.

Ways to detect leaks.

Thermal imaging, gas detectors, moisture meters, acoustic detectors, infrastructure detectors, pressure gauges, UV, 360 fiber cameras, a professional who comes to a leak site must have the variety of technologies to detect the leak. Without the required equipment, it is not possible to completely locate the leak. It is important to check with what equipment the "leak detector" comes to our home. We can already understand from the phone call or from the amount that the detector requires how professional. And what does the detector use. Quality equipment costs money and quite a bit. Advanced technology solves the mental anguish and unnecessary destruction for the customer. Fiber optic camera: A fiber optic camera. A camera that is inserted into the sewer pipe to identify failures. With the help of the camera, the cause of the leak and its exact location can be seen. There are types of cameras, some of which are 360-degree robotic cameras that can scan the sewer system and produce a report of findings after the photo is taken. There are cameras with high image quality, which is important because this leads to accurate identification of the failure and not guessing. A poor-quality camera does not provide a certain identification of the failure. And causes us to pay unnecessary money. A professional photographer is equally important, who knows how to identify the failure professionally and not guess. In a situation where the photographer is not sure about the photo, he can repair an undamaged area and not solve the problem for which he came. With the help of a professional pipe photographer, additional tests can be performed before making a repair for certain identification if there is a suspicion of a failure in the pipe, for which the photo was taken. Pipe Interior Photography Our technology for pipe interior photography checks sewer infrastructure, drainage, sewer conditions vary from one pipe to another. You never know what you are going to find in the pipe. And you need diagnostic tools and methods that can withstand any failure you find. With pipe interior photography, we give you the clearest and most comprehensive picture of The entire plumbing system. We provide with the help of internal pipe photography you get all the intelligence you need to make smart decisions, regarding the planning and further treatment of your sewage/drainage. With the help of internal pipe photography we know how to identify quickly and at a reasonable price which lines are not working properly. So that you can focus your time and resources where they are needed. Internal pipe inspections are clean and accurate and can quickly and at a low price determine the nature of the problem in the piping. At the end of the photography, a detailed report is issued for failures in the piping and recommendations for treatment. UV testing: This is not a test that is performed on sewage/drainage/sludge piping. This test combined with optical photography gives us a complete picture of the piping being tested and certainty about the leak and the remaining failure is visible in the piping on which the photography was performed. Thermal Camera Thermal Imaging While a fiber optic camera works inside pipes, it is not useful for locating live water leaks. In these circumstances, a thermal camera can work really well for water pipes. Hot water pipes in particular have a different temperature than the surrounding area if there is a leak. In hot water pipes, they seep into the surrounding area and temporarily heat it up. The change in temperature can be seen on the thermal camera, which will locate the leak. Acoustic Detector An acoustic system with a microphone held close to the suspected leak will amplify the sound of dripping water, allowing the plumber to figure out where the leak is. A microphone can be used as an alternative to a thermal camera, but is only effective when the water noise changes significantly. Smaller leaks, or leaks where there is seepage rather than a high burst of water, are difficult to detect with a microphone. Gas detector Gas detectors introduce gas into the water supply system. With this detector, you can detect small leaks that cannot be detected with a thermal camera or an acoustic detector. The gas system that is inserted into the water pipe is made of hydrogen and nitrogen, which can quickly seep into the ground and break through, and with the help of the sensor attached to the ground, you can quickly identify the leak area. With a moisture meter, you can know the moisture level in the wall/floor to identify a wet or damp area. A tool for identifying leaks and checking the moisture level under the flooring. Pressure gauge, with the pressure gauge, you can check the pipes divided by taps, to identify interior leaks in apartments, and to isolate the pipes to identify leaks. Infrastructure locator The role of the infrastructure locator is to identify the characteristics of the pipes for the purpose of monitoring and checking the pipes with the help of the detectors. If the infrastructure is not located, it would be very difficult to work and identify the leak. The infrastructure locator is also used to identify electrical and electronic systems underground.

Pipeline-damage-due-to-water-leakage. To be treated quickly!!!!