בלוג

Commercial water leak detection

Commercial water leak detection

Commercial Leak Detection

Leak Detection in Industrial Buildings Expert Advice

In industrial buildings, the detection is much more complex and requires different and advanced technological equipment due to the differences in the piping and its length than that of a house, and accordingly, the method of detecting leaks is also different and requires extensive and rich experience.
Professional experience is very important in this detection. If there is a suspicion of a leak, it is recommended to detect the leak as soon as possible so as not to damage the building's infrastructure and/or the electricity, gas and communications infrastructures that usually run together with water infrastructures and as a result of the leaks can cause dangerous damage such as collapse of the foundations, fire, disruption of the communications and electrical systems, gas leaks, and other factors. Therefore, to deal with the failure quickly for a quick return to normal.

Leak Detection in Factories
There is quite a bit of electrical equipment in factories, and when a water leak appears, this causes a real danger to the electrical equipment and disruption of the systems, and in extreme cases, a fire due to disruptions in the electrical system.
It is important to perform leak detection as soon as possible to prevent these damages.

Technological equipment for leak detection in industry

Gas system – detection by gas systems to detect water leaks is carried out by a qualified leak detector to use this equipment. A licensed leak detector who knows how to inject the gas into the system at the appropriate pressures at the correct pressure. The gas compound is made up of 95% nitrogen and 5% hydrogen. This compound is only suitable for detecting leaks when the gas is able to rise to the surface. The gas system has special sensors that detect the concentration of gas in the leak area.
Pipeline Locator – A pipeline location system can show us the route of the pipe and the depth at which it is located without the need for excavation, using a transmitter and radio wave location.
Acoustic detector – Detection by an acoustic detector is done by listening to the sound received from the pipe. This detection requires a lot of experience to identify the noise of the leak. While passing above the ground in the detector's inventions, you can hear the noise of the pipe and when approaching the leak, the detector screen translates the noise level into numbers and accordingly you can identify the source of the water leak.
Thermal camera – Leak detection A thermal camera is able to detect temperature changes in a structure. A thermal camera gives us pinpoint detection, especially in hot water pipes, where you can see the spread of heat in the area of ​​a water leak.
360 fiber optic camera – Most leaks are not from water pipes, they are in sewer/drainage pipes. In this pipeline, the best way to locate the leak is by using a fiber camera with a 360-degree head that scans the damaged pipeline inside the pipe. The failure can be identified in the best way.

Commercial Leak Detection

Leak Detection in Industrial Buildings Expert Advice

In industrial buildings, the detection is much more complex and requires different and advanced technological equipment due to the differences in the piping and its length than that of a house, and accordingly, the method of detecting leaks is also different and requires extensive and rich experience.
Professional experience is very important in this detection. If there is a suspicion of a leak, it is recommended to detect the leak as soon as possible so as not to damage the building's infrastructure and/or the electricity, gas and communications infrastructures that usually run together with water infrastructures and as a result of the leaks can cause dangerous damage such as collapse of the foundations, fire, disruption of the communications and electrical systems, gas leaks, and other factors. Therefore, to deal with the failure quickly for a quick return to normal.

Leak Detection in Factories
There is quite a bit of electrical equipment in factories, and when a water leak appears, this causes a real danger to the electrical equipment and disruption of the systems, and in extreme cases, a fire due to disruptions in the electrical system.
It is important to perform leak detection as soon as possible to prevent these damages.

Technological equipment for leak detection in industry

Gas system – detection by gas systems to detect water leaks is carried out by a qualified leak detector to use this equipment. A licensed leak detector who knows how to inject the gas into the system at the appropriate pressures at the correct pressure. The gas compound is made up of 95% nitrogen and 5% hydrogen. This compound is only suitable for detecting leaks when the gas is able to rise to the surface. The gas system has special sensors that detect the concentration of gas in the leak area.
Pipeline Locator – A pipeline location system can show us the route of the pipe and the depth at which it is located without the need for excavation, using a transmitter and radio wave location.
Acoustic detector – Detection by an acoustic detector is done by listening to the sound received from the pipe. This detection requires a lot of experience to identify the noise of the leak. While passing above the ground in the detector's inventions, you can hear the noise of the pipe and when approaching the leak, the detector screen translates the noise level into numbers and accordingly you can identify the source of the water leak.
Thermal camera – Leak detection A thermal camera is able to detect temperature changes in a structure. A thermal camera gives us pinpoint detection, especially in hot water pipes, where you can see the spread of heat in the area of ​​a water leak.
360 fiber optic camera – Most leaks are not from water pipes, they are in sewer/drainage pipes. In this pipeline, the best way to locate the leak is by using a fiber camera with a 360-degree head that scans the damaged pipeline inside the pipe. The failure can be identified in the best way.

Commercial Leak Detection

Leak Detection in Industrial Buildings Expert Advice

In industrial buildings, the detection is much more complex and requires different and advanced technological equipment due to the differences in the piping and its length than that of a house, and accordingly, the method of detecting leaks is also different and requires extensive and rich experience.
Professional experience is very important in this detection. If there is a suspicion of a leak, it is recommended to detect the leak as soon as possible so as not to damage the building's infrastructure and/or the electricity, gas and communications infrastructures that usually run together with water infrastructures and as a result of the leaks can cause dangerous damage such as collapse of the foundations, fire, disruption of the communications and electrical systems, gas leaks, and other factors. Therefore, to deal with the failure quickly for a quick return to normal.

Leak Detection in Factories
There is quite a bit of electrical equipment in factories, and when a water leak appears, this causes a real danger to the electrical equipment and disruption of the systems, and in extreme cases, a fire due to disruptions in the electrical system.
It is important to perform leak detection as soon as possible to prevent these damages.

Technological equipment for leak detection in industry

Gas system – detection by gas systems to detect water leaks is carried out by a qualified leak detector to use this equipment. A licensed leak detector who knows how to inject the gas into the system at the appropriate pressures at the correct pressure. The gas compound is made up of 95% nitrogen and 5% hydrogen. This compound is only suitable for detecting leaks when the gas is able to rise to the surface. The gas system has special sensors that detect the concentration of gas in the leak area.
Pipeline Locator – A pipeline location system can show us the route of the pipe and the depth at which it is located without the need for excavation, using a transmitter and radio wave location.
Acoustic detector – Detection by an acoustic detector is done by listening to the sound received from the pipe. This detection requires a lot of experience to identify the noise of the leak. While passing above the ground in the detector's inventions, you can hear the noise of the pipe and when approaching the leak, the detector screen translates the noise level into numbers and accordingly you can identify the source of the water leak.
Thermal camera – Leak detection A thermal camera is able to detect temperature changes in a structure. A thermal camera gives us pinpoint detection, especially in hot water pipes, where you can see the spread of heat in the area of ​​a water leak.
360 fiber optic camera – Most leaks are not from water pipes, they are in sewer/drainage pipes. In this pipeline, the best way to locate the leak is by using a fiber camera with a 360-degree head that scans the damaged pipeline inside the pipe. The failure can be identified in the best way.